基本描述

别名

FITC-Annexin V/PI 细胞凋亡试剂盒 | Annexin V-FITC细胞凋亡检测试剂盒 | Annexin V-FITC 凋亡检测试剂盒 | Annexin V细胞凋亡检测试剂盒

英文别名

规格或纯度

适用于免疫荧光(IF), BioReagent, 生物染色剂, 用于显微镜

稳定性与储存

Store at 2-8°C long term (12 months). Store in the dark. Do not freeze.

英文名称

Annexin V-FITC/PI Apoptosis Detection Kit

储存温度

2-8°C储存,避光,禁止冷冻

运输条件

冰袋运输

备注

此产品可替代 A266226

产品介绍

A1372286	Components	20T	50T	100T	Storage
A1372286A	10X Annexin V Binding Buffer	5 mL	10 mL	20 mL	2-8℃
A1372286B	Annexin V-FITC	100μL	250 μL	500 μL	2-8℃. Store in the dark.
A1372286C	Propidium iodide Staining Solution (PI)	100μL	250 μL	500 μL	2-8℃. Store in the dark.

背景介绍：

膜联蛋白（Annexins）是一类钙离子依赖型磷脂结合蛋白，能特异性结合磷脂酰丝氨酸（PS）。在正常生理状态下，PS只分布在细胞膜脂质双层的内侧。细胞凋亡早期， PS由脂膜内侧翻向外侧，在磷脂双分子层中的不对称分布丧失，从而使细胞成为被吞噬的目标。一旦PS暴露在膜的外表面，它便可在钙离子存在的情况下，被荧光标记的膜联蛋白V（Annexin V）检测到。

在凋亡早期，活性染料（如碘化丙啶PI、7-AAD）不能通过细胞脂膜。这类细胞便只会被Annexin V染色，但不被活性染料染色，从而可区分出处于早期凋亡的细胞。然而，在凋亡晚期，细胞膜完整性丧失，使得Annexin V也能结合细胞内部的PS。此时，活性染料可用于区分晚期凋亡和坏死细胞（Annexin V阳性、活性染料阳性）与早期凋亡细胞（Annexin V阳性、活性染料阴性）。

本试剂盒适用于通过流式细胞术对死亡细胞（如凋亡或坏死细胞）进行鉴定和计数。

注意事项：

1. 使用时请避光以减缓荧光淬灭；

2. PI染料具有具有剧毒性和致突变性，操作时需谨慎；

3. 由于膜联蛋白V（Annexin V）与磷脂酰丝氨酸（PS）的结合具有钙依赖性，因此在Annexin V实验中务必避免使用含EDTA或其他钙螯合剂的缓冲液。

使用说明：

1. 使用前需将10x 结合缓冲液用去离子水稀释至1x（1mL 10x缓冲液加9mL去离子水）；

2. 预冷PBS清洗细胞两次后，按照1.0-5.0x105/mL的密度用1x Annexin V结合缓冲液重悬；

3. 每100μL细胞悬液中加入5μL 荧光标记Annexin V及2μL PI染料；

4. 轻柔涡旋混匀细胞，室温避光孵育10min；

5. 加入100μL结合缓冲液，1h内完成上机分析。

A1372286	Components	20T	50T	100T	Storage
A1372286A	10X Annexin V Binding Buffer	5 mL	10 mL	20 mL	2-8℃
A1372286B	Annexin V (FITC)	100μL	250 μL	500 μL	2-8℃. Store in the dark.
A1372286C	Propidium iodide Staining Solution (PI)	100μL	250 μL	500 μL	2-8℃. Store in the dark.

Background information

Annexins are a family of calcium-dependent phospholipid-binding proteins that preferentially bind phosphatidylserine (PS). Under normal physiologic conditions, PS is predominantly located in the inner leaflet of the plasma membrane. Upon initiation of apoptosis, PS loses its asymmetric distribution across the phospholipid bilayer and is translocated to the extracellular membrane leaflet marking cells as targets of phagocytosis. Once on the outer surface of the membrane, PS can be detected by fluorescently labeled Annexin V in a calcium-dependent manner.

In early-stage apoptosis, the plasma membrane excludes viability dyes such as propidium iodide (PI), 7-AAD. These cells will stain with Annexin V but not a viability dye, thus distinguishing cells in early apoptosis. However, in late stage apoptosis, the cell membrane loses integrity thereby allowing Annexin V to also access PS in the interior of the cell. A viability dye can be used to resolve these late-stage apoptotic and necrotic cells (Annexin V, viability dye-positive) from the early-stage apoptotic cells (Annexin V positive, viability dye-negative).

This kit is suitable for the identification and enumeration of dead cells, such as apoptotic or necrotic cells, by flow cytometry.

Precautions

1. Please try to avoid light when using to slow down the quenching of fluorescence.

2. Propidium Iodide Solution is toxigenic and mutagenic; handle with care.

3. Due to the calcium dependence of the Annexin V:PS interaction, it is critical to avoid buffers containing EDTA or other calcium chelators during Annexin V experiments.

Instruction for use

1. Dilute 10X Binding Buffer to 1X using distilled water (1 mL 10X Binding Buffer + 9 mL ddH2O).

2. Wash cells twice with cold PBS and then resuspend the desired amount of cells in Annexin V Binding Buffer at a concentration of 1.0-5.0 x 106 cells/mL.

3. Add 5 µl of FITC Annexin V and 2 µl PI to 100 µL of the cell suspension

4. Gently vortex the cells and incubate for 10 min at RT (25°C) in the dark.

5. Add 100 µl of 1X Binding Buffer to each assay. Analyze by flow cytometry within 1 hr.

图片

Flow Cytometry: Annexin V-FITC/PI Apoptosis Detection Kit (A1372286)

Annexin V-FITC/PI Apoptosis Detection Kit (A1372286) - Flow Cytometry
Flow cytometric analysis of U937 cells untreated (left) or treated with 4µM camptothecin (C111281) for 4 hours using Annexin V-FITC/PI Apoptosis Detection Kit (A1372286).

名称和识别符

分子类型	试剂盒

化学和物理性质

敏感性	Light-sensitive

质检证书（CoA,COO,BSE/TSE 和分析图谱)

C of A & Other Certificates(BSE/TSE, COO):

输入批号以搜索分析图谱:

技术文档和文章

a1372286_ annexin v-fitcpi apoptosis detection kit.pdf

a1372286_annexin v-fitc pi细胞凋亡检测试剂盒产品说明书.pdf

膜联蛋白V染色

Categories: 技术文章

探索主题:

细胞凋亡膜联蛋白V

Annexin V staining

Categories: 技术文章

探索主题:

Apoptosis Annexin V

溶液计算器

摩尔浓度计算器

计算溶液所需的质量、体积或浓度。

质量

=

浓度

x

体积

x

分子量

g/mol

稀释计算器

计算配制储备溶液所需的稀释度。

浓度1（C1）

x

体积 1 (V1)

=

浓度 2 (C2)

x

体积 2 (V2)

复溶计算器

复溶计算器允许您快速计算试剂的体积，以复溶小瓶。只需输入试剂的质量和目标浓度，计算器将确定其余部分。

体积（添加到小瓶中）

=

质量（小瓶）

÷

所需的复溶浓度

货号 (SKU)	包装规格	是否现货
A1372286-20T	20T	现货
A1372286-50T	50T	现货
A1372286-100T	100T	现货

Annexin V-FITC/PI细胞凋亡检测试剂盒

库存信息

库存信息

库存信息

基本描述

图片

名称和识别符

化学和物理性质

质检证书（CoA,COO,BSE/TSE 和分析图谱)

技术文档和文章

可替换产品

溶液计算器

摩尔浓度计算器

稀释计算器

复溶计算器