基本描述

别名

T4 DNA连接酶

英文名称

T4 DNA Ligase

储存温度

-20°C储存,避免反复冻融

运输条件

超低温冰袋运输

产品介绍

T4 DNA Ligase 是从表达T4 DNA Ligase 基因的大肠杆菌经诱导表达后分离纯化而来的，催化相邻DNA链的5’磷酸基团和3’羟基基团以磷酸二酯键结合反应。该酶可催化平末端或粘性末端DNA的连接，修复双链DNA、RNA、DNA/RNA杂交中的单链中的单链切口，但是对于单链核苷酸，没有活性。

T665705	Component	100 U	500 U	5 KU	Storage
T665705A	T4 DNA Ligase, 5 U/μL	20 μL	100 μL	1 mL	-20℃. Avoid freeze/thaw cycle.
T665705B	10×Ligation Buffer	150 μL	750 μL	5×1.5 mL	-20℃. Avoid freeze/thaw cycle.
T665705C	50% PEG Solution	150 μL	750 μL	5×1.5 mL	-20℃. Avoid freeze/thaw cycle.

实验前准备及重要注意事项：
1.T4 DNA Ligase的最终用量不要超过推荐的用量，否则影响连接效率。
2，PEG可以极大提高平末端的连接效率，我们推荐加入终浓度为5% PEG Solution以提
高平末端的连接效率。
3，为了提高转化效率，建议所加入连接产物的量不要超过感受态细胞体积的10%
4.由于T4 DNA Ligase中含有甘油，比较粘稠容易挂壁，建议使用之前短暂离心将液体
收集到管底，取样时枪头尽量不要深入液面太深以免粘在枪头上造成损失
使用方法：
i粘性末端的连接
1.反应体系:

组分	20 μL 反应体系	终浓度
线性载体DNA	X μL	20-100 ng
插入DNA片段	Y μL	插入片段:载体1:1-5:1
10×Ligation Buffer	2 μL	/
T4 DNA Ligase 5 U/ μL	0.2 μL	1 U
ddH20	补充至20 μL	20 μL

2.涡旋震荡，瞬间离心，将管壁上的溶液收集到管底。
3.反应条件:22C孵育10分钟。
4.瞬间离心，将管壁上的溶液收集到管底，65C孵育10分钟或70C孵育5分钟以灭活T4 DNA Ligase
5.可取5pL连接产物热击转化5uL感受态细胞或取15pL连接产物电击转化50pL感受态细胞。
注意:如需电击转化，推荐用乙醇沉淀法去除T4 DMA Ligase后进行电击转化

ii 平末端的连接

1.反应体系：

组分	20 μL 反应体系	终浓度
线性载体DNA	X μL	20-100 ng
插入DNA片段	Y μL	插入片段:载体1:1-5:1
10xLigation Buffer	2 μL	/
T4 DNA Ligase，5 U/uL	1 μL	5 U
50%PEG Solution	2 L	5%
ddH20	补充至20 μL	20 μL

2.涡旋震荡，瞬间离心，将管壁上的溶液收集到管底。
3，反应条件:22C孵育1小时。
4.瞬间离心，将管壁上的溶波收集到管底，65C孵育10分钟或70C孵育5分钟以灭活T4 DNA Ligase
5.可取5L连接产物热击转化50pL感受态细胞或取1-2L连接产物电击转化50pL感受态细胞。
注意:如需电击转化，推荐用乙醇沉淀法去除T4 DNA Ligase后进行电击转化
iii 线性DNA的自身环化
1.反应体系:

组分	50 μL 反应体系	终浓度
线性载体DNA	X μL	5-50 ng
10xLigation Buffer	5 μL	/
T4 DNA Ligase，5 U/uL	1 μL	5 U
ddH20	补充至50 μL	50 μL

2.涡旋震荡，瞬间离心，将管壁上的溶液收集到管底。
3，反应条件:粘性末端22C孵育10分钟:平末端22C孵育1小时。
4.瞬间离心，将管壁上的溶液收集到管底，65C孵育10分钟或70C孵育5分钟以灭活T4 DNA Ligase
5.可取5pL连接产物热击转化5pL感受态细胞或取1-2pL连接产物电击转化50pL感受态细胞。
注意:如需电击转化，推荐用乙醇沉淀法去除T4 DNA Ligase后进行电击转化

T4 DNA Ligase is isolated and purified from Escherichia coli expressing the T4 DNA Ligase gene after induction and expression. It catalyzes the binding reaction of adjacent DNA strands with 5 'phosphate groups and 3' hydroxyl groups via phosphodiester bonds. This enzyme can catalyze the connection of flat or sticky end DNA, repairing single stranded incisions in double stranded DNA, RNA, and DNA/RNA hybridization, but has no activity for single stranded nucleotides.

T665705	Component	100 U	500 U	5 KU	Storage
T665705A	T4 DNA Ligase, 5 U/μL	20 μL	100 μL	1 mL	-20℃. Avoid freeze/thaw cycle.
T665705B	10×Ligation Buffer	150 μL	750 μL	5×1.5 mL	-20℃. Avoid freeze/thaw cycle.
T665705C	50% PEG Solution	150 μL	750 μL	5×1.5 mL	-20℃. Avoid freeze/thaw cycle.

Preparation and important precautions before the experiment:
The final dosage of T4 DNA Ligase should not exceed the recommended dosage, otherwise it will affect the connection efficiency.
2. PEG can greatly improve the connection efficiency of the flat end. We recommend adding a final concentration of 5% PEG Solution to improve the connection efficiency
The connection efficiency of the high flat end.
3. To improve conversion efficiency, it is recommended that the amount of connecting products added should not exceed 10% of the volume of receptive cells
4. Due to the presence of glycerol in T4 DNA ligase, which is viscous and prone to wall sticking, it is recommended to briefly centrifuge the liquid before use
Collect to the bottom of the tube, and when sampling, try not to let the nozzle go too deep into the liquid level to avoid sticking to the nozzle and causing losses
Usage:
i Connection at the adhesive end
1. Reaction system:

Component	20 μL Reaction system	Final concentration
Linear vector DNA	X μL	20-100 ng
Inserting DNA fragments	Y μL	Insertion fragments: vector 1:1-5:1
10×Ligation Buffer	2 μL	/
T4 DNA Ligase 5 U/ μL	0.2 μL	1 U
ddH20	Add to 20 μL	20 μL

2. Vortex oscillation, instant centrifugation, collects the solution on the pipe wall to the bottom of the pipe.
3. Reaction conditions: Incubate at 22C for 10 minutes.
4. Instantly centrifuge and collect the solution on the tube wall to the bottom of the tube. Incubate at 65C for 10 minutes or 70C for 5 minutes to inactivateT4 DNA Ligase
5. Take 5pL of the connecting product and heat shock transform it into 5uL of competent cells, or take 15pL of the connecting product and shock transform it into 50pL of competent cells Cells.
Attention: If electric shock conversion is required, it is recommended to use ethanol precipitation method to remove T4 DMA Ligase before conducting electric shock conversion
Ii. Connection at the flat end
1. Reaction system:

Component	20 μL Reaction system	Final concentration
Linear vector DNA	X μL	20-100 ng
Inserting DNA fragments	Y μL	Insertion fragments: vector 1:1-5:1
10xLigation Buffer	2 μL	/
T4 DNA Ligase，5 U/uL	1 μL	5 U
50%PEG Solution	2 L	5%
ddH20	Add to 20 μL	20 μL

2. Vortex oscillation, instant centrifugation, collects the solution on the pipe wall to the bottom of the pipe.
3. Reaction conditions: Incubate at 22C for 1 hour.
4. Instantly centrifuge and collect the dissolved waves on the tube wall to the bottom of the tube. Incubate at 65C for 10 minutes or 70C for 5 minutes to inactivate T4 DNA ligase
5. Take 5L of connecting products and heat shock convert 50pL of competent cells, or take 1-2L of connecting products and shock convert 50pL of competent cells.
Note: If electroconversion is required, it is recommended to use ethanol precipitation method to remove T4 DNA ligase before electroconversion
iii Self cyclization of linear DNA
1. Reaction system:

Component	50 μL Reaction system	Final concentration
Linear vector DNA	X μL	5-50 ng
10xLigation Buffer	5 μL	/
T4 DNA Ligase，5 U/uL	1 μL	5 U
ddH20	Add to 50 μL	50 μL

2. Vortex oscillation, instant centrifugation, collects the solution on the pipe wall to the bottom of the pipe.
3. Reaction conditions: Incubate at sticky end 22C for 10 minutes, and incubate at flat end 22C for 1 hour.
4. Instantly centrifuge and collect the solution on the tube wall to the bottom of the tube. Incubate at 65C for 10 minutes or 70C for 5 minutes to inactivate T4 DNA ligase
5. Take 5pL of connecting products and heat shock them to convert 5pL of competent cells, or take 1-2pL of connecting products and shock them to convert 50pL of competent cells.
Note: If electroconversion is required, it is recommended to use ethanol precipitation method to remove T4 DNA ligase before electroconversion

质检证书（CoA,COO,BSE/TSE 和分析图谱)

C of A & Other Certificates(BSE/TSE, COO):

输入批号以搜索分析图谱:

技术文档和文章

t665705_t4 dna ligase.pdf

PCR实验室污染防控与高效试剂应用： ——优化实验步骤与选择优质试剂

Categories: 技术文章

探索主题:

缓冲液 PCR DNA聚合酶 PCR试剂和试剂盒 PCR与扩增克隆和基因表达

PCR Laboratory Contamination Prevention and Efficient Reagent Application: —Optimizing Experimental Steps and Choosing

Categories: 技术文章

探索主题:

PCR Buffer DNA polymerase PCR reagents and kits PCR and amplification Cloning and gene expression

PCR Laboratory Contamination Prevention and Efficient Reagent Application: —Optimizing Experimental Steps and Choosing

Categories: 技术文章

探索主题:

PCR Buffer DNA polymerase PCR reagents and kits PCR and amplification Cloning and gene expression

此产品的引用文献

如何在您的发表作品中引用阿拉丁的产品和网站? 引用文献检索

引用文献

1. Yiming Zhang, Zhi Chen, Songrui Wei, Jing Wang, Yujun Zhang, Huiling Lin, Hai Fu, Yingxia Liu, Qi Gao, Han Zhang, Zhongjian Xie. (2025) CRISPR CLAMP: Attomolar level of multiple miRNAs. CHEMICAL ENGINEERING JOURNAL, (161990). [10.1016/j.cej.2025.161990]

溶液计算器

摩尔浓度计算器

计算溶液所需的质量、体积或浓度。

质量

=

浓度

x

体积

x

分子量

g/mol

稀释计算器

计算配制储备溶液所需的稀释度。

浓度1（C1）

x

体积 1 (V1)

=

浓度 2 (C2)

x

体积 2 (V2)

复溶计算器

复溶计算器允许您快速计算试剂的体积，以复溶小瓶。只需输入试剂的质量和目标浓度，计算器将确定其余部分。

体积（添加到小瓶中）

=

质量（小瓶）

÷

所需的复溶浓度

货号 (SKU)	包装规格	是否现货
T665705-100U	100U	期货
T665705-500U	500U	期货
T665705-5KU	5KU	期货

T4 DNA Ligase

库存信息

库存信息

库存信息

基本描述

质检证书（CoA,COO,BSE/TSE 和分析图谱)

技术文档和文章

此产品的引用文献

引用文献

溶液计算器

摩尔浓度计算器

稀释计算器

复溶计算器