Basic Description

Specifications & Purity

1N

Stability And Storage

Store at 4℃ in the dark for up to 1 year, or room temperature for up to 1 month.

Storage Temp

Protected from light,Room temperature

Shipped In

Normal

Product Description

This reagent is made by heating and refluxing sodium tungstate, sodium molybdate, phosphoric acid, and concentrated hydrochloric acid in a certain proportion, and then refining them with lithium sulfate. It has a golden and transparent color and is a commonly used reagent for determining the content of proteins, peptides, polyphenols, tyrosine, and other substances in laboratory solutions. The acidity of this product is 1N. Please use it directly or dilute it appropriately according to experimental needs. This reagent can determine protein concentrations ranging from 0.05 to 1mg/mL. The linear relationship is best when the protein concentration is within the range of 0.05 to 0.5mg/mL. If the protein concentration of the test sample exceeds this range, please dilute it appropriately to the appropriate concentration range. This reagent is corrosive and should be avoided from contact with skin, mucous membranes, etc; When the color of the reagent turns dark green, it should be discarded.
Form:
Folin phenol reagent 500ml
Preparation before the experiment:
1. Preparation A1: Weigh 20g anhydrous sodium carbonate and 4g sodium hydroxide and dissolve them in 1L of water;
2. Preparation A2: Weigh 0.2g of copper sulfate and dissolve it in 20mL of water;
3. Preparation A3: Weigh 0.4g of potassium sodium tartrate and dissolve it in 20mL of water; On the day of measurement, mix A1: A2: A3 in a volume ratio of 100:1:1 to obtain reagent A. Mix and let it sit for 30 minutes before use. Mix A2 and A3 first, and then mix the mixture with A1. Reversing the order may result in precipitation. Reagent A can only be used on the same day. If precipitation or turbidity occurs, it needs to be re prepared. The three solutions can be stored separately at room temperature for a long time.
4. First, prepare a 2mg/mL protein mother liquor, and then dilute it into protein standard solutions of various concentrations according to the "Appendix".
Operation steps (total reaction volume 5.6mL):

/	Sample number label	mark 0	mark 1	mark 2	mark 3	mark 4	mark 5	mark 6	To be tested
1、Add sample	Add protein standard or test protein sample (mL)	0.1	0.1	0.1	0.1	0.1	0.1	0.1	0.1
/	Protein concentration(mg/mL)	0	0.05	0.10	0.20	0.25	0.40	0.50	To be tested
2、Add A	Add A5mL of reagent to each tube in sequence; After mixing, let it stand at room temperature for 10 minutes	/	/	/	/	/	/	/	/
3、Add B	Add 0.5mL of reagent B (Folin phenol reagent) to each tube in sequence (mix immediately for each tube added); Leave at room temperature for 30 minutes	/	/	/	/	/	/	/	/
4、Determination	Under 750nm wavelength light, zero the equipment with a standard tube and measure the absorbance (OD value) of each tube	/	/	/	/	/	/	/	/
5、Calculation	Draw a standard curve based on the data measured by tubes 0 to 6, and calculate the concentration of each sample to be tested (if the concentration of the sample exceeds the range of the standard curve, please dilute it appropriately and retest).	/	/	/	/	/	/	/	/

Note: The above reagent quantities can be scaled proportionally based on the actual required total reaction volume (protein sample: reagent A: Folin phenol reagent=1:50:5).
Matters needing attention:
1. Pay attention to sealed storage to avoid volatile and corrosive substances.
2. For your safety and health, please wear lab coats and disposable gloves when operating.
Validity period: 6 months.

Certificates（CoA,COO,BSE/TSE and Analysis Chart)

C of A & Other Certificates(BSE/TSE, COO):

Analytical Chart:

Find and download the COA for your product by matching the lot number on the packaging.

6 results found

Lot Number	Certificate Type	Date	Item
F2523397	Certificate of Analysis	Jun 12, 2025	F743371
F2523398	Certificate of Analysis	Jun 12, 2025	F743371
D2503524	Certificate of Analysis	Mar 27, 2025	F743371
C2511376	Certificate of Analysis	Mar 04, 2025	F743371
B2506761	Certificate of Analysis	Jan 09, 2025	F743371
I2429137	Certificate of Analysis	Sep 20, 2024	F743371

Chemical and Physical Properties

Sensitivity	Light sensitive

Citations of This Product

How to Cite Aladdin Scientific Products? Citations Search

Solution Calculators

Molarity Calculator

Determine the necessary mass, volume, or concentration for preparing a solution.

Mass

=

Concentration

x

Volume

x

M. Wt*

g/mol

*When preparing stock solutions, always use the batch-specific molecular weight of the product found on the vial label and the Certificate of Analysis (available online).

Dilution Calculator

Determine the dilution needed to prepare a stock solution.

Concentration 1 (C1)

x

Volume 1 (V1)

=

Concentration 2 (C2)

x

Volume 2 (V2)

Reconstitution Calculator

The reconstitution calculator enables you to quickly determine the volume of a reagent needed to reconstitute your vial. Just enter the mass of the reagent and the target concentration, and the calculator will do the rest.

Volume (to add to vial)

=

Mass (in vial)

÷

Desired Reconstitution Concentration

Folin & Ciocalteu's Phenol Reagent