首页
400-620-6333
计算溶液所需的质量、体积或浓度。
This is a demo store. No orders will be fulfilled.
便捷迷你垂直电泳槽及配件
品牌： 芯硅谷
低至
¥29.90
有货
只有 %1 左
切换导航
搜索
一般描述
便捷迷你垂直电泳槽（4块胶）产品特点
1.可容纳1-4块手灌胶或预制胶，1小时内完成多达4块小型凝胶电泳
2.灌胶框底部独有超平玻璃支撑，有效避免了玻璃板滑落现象；按压锁紧方式，紧固效果更佳；整板反衬设计，清晰衬托分离胶浓缩胶的灌制过程
3.楔型设计的电泳芯边卡平行滑动，使短玻璃可靠挤压密封台阶，避免了旋转式边卡抬升不到位而漏液现象
4.制胶底座流线型美观设计，非弹簧式按压锁紧，避免了弹簧压力不够或老化造成漏胶
5.封边隔条粘固在长玻璃板上，保证玻璃板精确对齐，避免漏胶
6.凸轮制胶框确保精确对齐
7.标配4个独立制胶底座，方便在狭窄实验台上灵活放置，可同时灌制4块胶
8.带边齿的梳子和内置脊使凝胶与空气隔绝，避免抑制凝胶聚合反应
9.标有厚度和孔数的玻璃板和梳子，便于识别
10.封边隔条使得玻璃板加厚，不宜破碎
11.配免染胶预混液1瓶，免除了蛋白电泳脱色染色的繁琐过程（非标配）
12.配100孔各种孔径多用途离心管架1个
13.配可放置14片玻璃的玻璃板支架1个
便捷迷你垂直电泳槽（4块胶）技术参数
1.凝胶数量：1-4块
2.凝胶厚度：1.0mm（标配）；0.75mm、1.5mm
3.预制胶：兼容PIERCE,BIO-RAD
4.玻璃板尺寸：100×83mm
5.凝胶尺寸：83×73mm
6.梳子规格：1.0mm厚, 10、15齿（标配）；0.75mm10、15齿；1.5mm10、15齿
7.铂金电极：φ0.25mm
8.外形尺寸：180×120×160mm（L×W×H）
便捷迷你垂直电泳槽（2块胶）产品特点
1.可容纳1-2块手灌胶或预制胶，1小时内完成电泳实验
2.灌胶框底部独有超平玻璃支撑，有效避免了玻璃板滑落现象；按压锁紧方式，紧固效果更佳；整板反衬设计，清晰衬托分离胶浓缩胶的灌制过程
3.楔型设计的电泳芯边卡平行滑动，使短玻璃可靠挤压密封台阶，避免了旋转式边卡抬升不到位而漏液现象
4.制胶底座流线型美观设计，非弹簧式按压锁紧，避免了弹簧压力不够或老化造成漏胶
5.封边隔条粘固在长玻璃板上，保证玻璃板精确对齐，避免漏胶
6.凸轮制胶框确保精确对齐
7.标配2个独立制胶底座，方便在狭窄实验台上灵活放置，可同时灌制2块胶
8.带边齿的梳子和内置脊使凝胶与空气隔绝，避免抑制凝胶聚合反应
9.标有厚度和孔数的玻璃板和梳子，便于识别
10.封边隔条使得玻璃板加厚，不宜破碎
11.配免染胶预混液1瓶，免除了蛋白电泳脱色染色的繁琐过程（非标配）
12.配100孔各种孔径多用途离心管架1个
13.配可放置14片玻璃的玻璃板支架1个
便捷迷你垂直电泳槽（2块胶）技术参数
1.凝胶数量：1-2块
2.凝胶厚度：1.0mm（标配）；0.75mm、1.5mm
3.预制胶：兼容PIERCE, BIO-RAD
4.玻璃板尺寸：100×83mm
5.凝胶尺寸：83×73mm
6.梳子规格：1.0mm厚, 10、15齿（标配）；0.75mm10、15齿；1.5mm10、15齿
7.铂金电极：φ0.25mm
8.外形尺寸：180×120×160mm（L×W×H）
规格和参数
|
Product features of convenient mini vertical electrophoresis tank (4 pieces of gel)
1. It can hold 1-4 pieces of hand-filled gel or precast gel, and complete up to 4 pieces of small gel electrophoresis within 1 hour
2. Unique ultra-flat glass support at the bottom of the glue box, effectively avoiding the phenomenon of glass plate sliding; pressing and locking method, the fastening effect is better; the whole plate is designed with contrast, clearly setting off the filling process of separation glue and concentrated glue
3. The wedge-shaped design of the electrophoresis core edge card slides in parallel, so that the short glass can reliably squeeze the sealing step, avoiding the phenomenon of liquid leakage due to the improper lifting of the rotating edge card
4. The streamlined and beautiful design of the rubber base, non-spring pressing and locking, avoids the lack of spring pressure or aging caused by glue leakage
5. The side-banding spacer is glued to the long glass plate to ensure accurate alignment of the glass plate and avoid glue leakage
6. The cam rubber frame ensures precise alignment
7. It is equipped with 4 independent glue making bases as standard, which is convenient for flexible placement on a narrow laboratory bench, and 4 pieces of glue can be poured at the same time
8. The comb with teeth and built-in ridges isolate the gel from the air and avoid inhibiting the gel polymerization reaction
9. Glass plate and comb marked with thickness and number of holes for easy identification
10. The edge-sealing spacer makes the glass plate thicker and not suitable for breaking
11. Equipped with 1 bottle of dye-free gel premix, eliminating the tedious process of protein electrophoresis decolorization and dyeing (non-standard)
12. Equipped with a 100-hole multi-purpose centrifuge tube rack of various apertures
13. Equipped with a glass plate holder that can hold 14 pieces of glass
Technical parameters of convenient mini vertical electrophoresis tank (4 pieces of gel)
1. Gel quantity: 1-4 pieces
2. Gel thickness: 1.0mm (standard configuration); 0.75mm, 1.5mm
3. Precast glue: compatible with PIERCE, BIO-RAD
4. Glass plate size: 100×83mm
5. Gel size: 83×73mm
6. Comb specifications: 1.0mm thick, 10, 15 teeth (standard); 0.75mm 10, 15 teeth; 1.5mm 10, 15 teeth
7. Platinum electrode: φ0.25mm
8. Dimensions: 180×120×160mm (L×W×H)
Product features of convenient mini vertical electrophoresis tank (2 pieces of gel)
1. It can hold 1-2 pieces of hand-filled glue or precast glue, and the electrophoresis experiment can be completed within 1 hour
2. Unique ultra-flat glass support at the bottom of the glue box, effectively avoiding the phenomenon of glass plate sliding; pressing and locking method, the fastening effect is better; the whole plate is designed with contrast, clearly setting off the filling process of separation glue and concentrated glue
3. The wedge-shaped design of the electrophoresis core edge card slides in parallel, so that the short glass can reliably squeeze the sealing step, avoiding the phenomenon of liquid leakage due to the improper lifting of the rotating edge card
4. The streamlined and beautiful design of the rubber base, non-spring pressing and locking, avoids the lack of spring pressure or aging caused by glue leakage
5. The side-banding spacer is glued to the long glass plate to ensure accurate alignment of the glass plate and avoid glue leakage
6. The cam rubber frame ensures precise alignment
7. Two independent glue making bases are equipped as standard, which is convenient for flexible placement on a narrow laboratory bench, and can be filled with 2 pieces of glue at the same time
8. The comb with teeth and built-in ridges isolate the gel from the air and avoid inhibiting the gel polymerization reaction
9. Glass plate and comb marked with thickness and number of holes for easy identification
10. The edge-sealing spacer makes the glass plate thicker and not suitable for breaking
11. Equipped with 1 bottle of dye-free gel premix, eliminating the tedious process of protein electrophoresis decolorization and dyeing (non-standard)
12. Equipped with a 100-hole multi-purpose centrifuge tube rack of various apertures
13. Equipped with a glass plate holder that can hold 14 pieces of glass
Technical parameters of convenient mini vertical electrophoresis tank (2 pieces of gel)
1. Gel quantity: 1-2 pieces
2. Gel thickness: 1.0mm (standard configuration); 0.75mm, 1.5mm
3. Precast glue: compatible with PIERCE, BIO-RAD
4. Glass plate size: 100×83mm
5. Gel size: 83×73mm
6. Comb specifications: 1.0mm thick, 10, 15 teeth (standard); 0.75mm 10, 15 teeth; 1.5mm 10, 15 teeth
7. Platinum electrode: φ0.25mm
8. Dimensions: 180×120×160mm (L×W×H)
Specifications and parameters
|
质检证书（CoA,COO,BSE/TSE 和分析图谱)
C of A & Other Certificates(BSE/TSE, COO):
输入批号以搜索分析图谱: