This is a demo store. No orders will be fulfilled.

UltraBio™ Plus Precast PAGE Gel(Tris-Gly)

$132.90
In stock
Only %1 left
Item Number
P753520
View related series
Precast Gel (7)

Basic Description

Product Name UltraBio™ Plus Precast PAGE Gel(Tris-Gly)
Product Description

UltraBio™ Plus Precast PAGE Gel(Tris-Gly) is a high-quality, ready-to-use gel in regular size. With a Tris -Glycine electrophoresis buffer, it only takes 40-70 minutes to complete electrophoresis, and very flat and sharp bands can be obtained. This precast gel has a 1.5cm high 4% stacking gel, with a very good protein separation effect. At the same time, this product has glass plates with reduced non-specific adsorptions. This product has identical or even better performance compared to home-made PAGE gels, and can be routinely used for PAGE and Western analysis.

Aladdin provides a variety of UltraBio™ precast gradient/fixed gels at different concentrations. Gradient gels are available in concentrations of 4-15%, 4-20% and 8-20%. Fixed gels include 6%, 8%, 10%, 12% and 15% gels. The gradient gels of 4-20% are most commonly used.Please refer to the table below for parameters of UltraBio™ Plus Precast PAGE Gels.

Product No. Gel Concentration Number of Wells Maximum Loading Volume Electrophoresis/Transfer Buffer System Protein Separation Range
P753520-A1-10EA 6% 10 60μl Tris-Glycine 50-150kD
P753520-A1-50EA 6% 10 60μl Tris-Glycine 50-150kD
P753520-B1-10EA 6% 15 30μl Tris-Glycine 50-150kD
P753520-B1-50EA 6% 15 30μl Tris-Glycine 50-150kD
P753520-A2-10EA 8% 10 60μl Tris-Glycine 30-90kD
P753520-A2-50EA 8% 10 60μl Tris-Glycine 30-90kD
P753520-B2-10EA 8% 15 30μl Tris-Glycine 30-90kD
P753520-B2-50EA 8% 15 30μl Tris-Glycine 30-90kD
P753520-A3-10EA 10% 10 60μl Tris-Glycine 20-80kD
P753520-A3-50EA 10% 10 60μl Tris-Glycine 20-80kD
P753520-B3-10EA 10% 15 30μl Tris-Glycine 20-80kD
P753520-B3-50EA 10% 15 30μl Tris-Glycine 20-80kD
P753520-A4-10EA 12% 10 60μl Tris-Glycine 12-60kD
P753520-A4-50EA 12% 10 60μl Tris-Glycine 12-60kD
P753520-B4-10EA 12% 15 30μl Tris-Glycine 12-60kD
P753520-B4-50EA 12% 15 30μl Tris-Glycine 12-60kD
P753520-A5-10EA 15% 10 60μl Tris-Glycine 10-40kD
P753520-A5-50EA 15% 10 60μl Tris-Glycine 10-40kD
P753520-B5-10EA 15% 15 30μl Tris-Glycine 10-40kD
P753520-B5-50EA 15% 15 30μl Tris-Glycine 10-40kD
P753520-A6-10EA 4-15% 10 60μl Tris-Glycine 20-180kD
P753520-A6-50EA 4-15% 10 60μl Tris-Glycine 20-180kD
P753520-B6-10EA 4-15% 15 30μl Tris-Glycine 20-180kD
P753520-B6-50EA 4-15% 15 30μl Tris-Glycine 20-180kD
P753520-A7-10EA 4-20% 10 60μl Tris-Glycine 10-180kD
P753520-A7-50EA 4-20% 10 60μl Tris-Glycine 10-180kD
P753520-B7-10EA 4-20% 15 30μl Tris-Glycine 10-180kD
P753520-B7-50EA 4-20% 15 30μl Tris-Glycine 10-180kD
P753520-A8-10EA 8-20% 10 60μl Tris-Glycine 10-90kD
P753520-A8-50EA 8-20% 10 60μl Tris-Glycine 10-90kD
P753520-B8-10EA 8-20% 15 30μl Tris-Glycine 10-90kD
P753520-B8-50EA 8-20% 15 30μl Tris-Glycine 10-90kD

The ratio of acrylamide to bisacrylamide is 29:1, and the gel thickness is 1.5mm. The maximum loading volume per well of 10-well and 15-well gels is 60μl and 30μl, respectively. Gel plate size, 98×84×4.1mm (width × height × thickness); gel size, 81×74×1.5mm (width × height × thickness).

Polyacrylamide gel electrophoresis (PAGE) technology is widely used in protein separation, purification, detection, identification, molecular weight determination and other experiments. It is one of the most basic experimental techniques in life science research.

Unlike conventional Tris-Glycine gels, UltraBio™ Plus Precase PAGE Gels are prepared with a slightly alkaline buffer without SDS, and can be used for both denaturing and native PAGE.

Selection of 10-well and 15-well precast gels: Protein bands obtained by 10-well precast gels are flatter and sharper. But when the number of samples to be examined is large or protein quantification is required, we recommend using the 15-well precast gel which has greater throughput and is more convenient for statistical quantitation analysis.

This product is safe and convenient to use. There is no need for gel preparation and casting, thus avoiding contact with toxic and irritating reagents. After electrophoresis, the gel can be easily removed from the glass plates.

The quality of this product is stable, with high consistency between batches.

This product has good protein resolution performance. Proteins in the gel can be transferred efficiently.

The electrophoresis time is short. The electrophoresis can be completed in 40-50 minutes at a 180V voltage or 60-70 minutes at 150V. The run time varies depending on experimental requirements. 


Precautions:

This precast gel cannot be frozen below 0℃.

The electrophoresis buffer in the inner chamber of the electrophoresis tank and the transfer buffer should be freshly prepared. Low-quality buffers, recycled buffers, or buffers that have been kept for too long will result in poor protein resolution and transfer.

This product is for R&D only. Not for drug, household, or other uses.

For your safety and health, please wear a lab coat and disposable gloves during the operation.

Storage and Shipping

Storage Temp Store at 2-8°C
Shipped In Wet ice
Stability And Storage Store at room temperature for up to 1 year, or at 4℃ for up to 18 months. Do not freeze below 0℃.

Certificates(CoA,COO,BSE/TSE and Analysis Chart)

C of A & Other Certificates(BSE/TSE, COO):
Analytical Chart:

Solution Calculators

Reviews

Customer Reviews

Shall we send you a message when we have discounts available?

Remind me later

Thank you! Please check your email inbox to confirm.

Oops! Notifications are disabled.