Preparation of CNTs-HfB2-SiBCN ceramic composite coatings with adjusted electrical conductivity

Aiming at the lack of stable and reliable electrode materials for high temperature wireless sensors , a solution was proposed to use SiBCN ceramic as thin film electrode. To optimize the conductivity of SiBCN coatings, different conductive fillers were incorporated into the precursor solution to prepare conductive SiBCN coatings and the relationship between the coating process parameters, surface morphology and conductivity was established. The results show that the microstructure of the composite can be adjusted in terms of the HfB 2 /CNT ratio to optimize the electrical conductivity . HfB 2 and CNTs are evenly distributed in the coating by adding dispersants and ground SiBCN self-fillers. The electrical conductivity of SiBCN coatings can be greatly enhanced by adding HfB 2 and CNTs fillers. Integrating conductive fillers such as HfB 2 and CNTs can form a diafiltration path and the resistivity of the prepared coating has been determined to be as low as 0.13 ± 0.01 Ω m. The conductivity did not necessarily increase with an increasing amount of fillers. Adding a balanced amount of filler particles to the ceramic matrix is the requirement for optimizing the electrical conductivity of the coating.