Low MWCO non-polyamide nanofiltration membranes synthesized in aqueous by coupling with catechol-amine chemistry and the oxidation-induced self-polymerization of m-phenylenediamine

Catechol-amine coatings offer versatile routes for surface modifications and nanofiltration (NF) membrane preparations. However, the formation of the selective layer is time-consuming and often deficient, rendering it unsuitable for large-scale applications. In this work, oxidation-induced self-polymerization and catechol-amine chemistry were combined to rapidly construct nanofiltration membranes in an aqueous medium . M -phenylenediamine (MPD) underwent oxidation and self-polymerized on a polysulfone (PSF) support. The addition of sodium periodate facilitated the subsequent tannic acid (TA) coating. The catechol-amine reaction between oxidized TA and poly-MPD forms crosslinked poly TA-MPD complexes, offering the resulting membrane a high selectivity. The role of NaIO 4 in the selective layer formation and the influences of the synthesis parameters on the membrane performance were discussed. Utilizing the facile method enabled the achievement of a low molecular weight cut-off (MWCO) NF membrane (180 Da). The membrane exhibited a high water permeance (10.9 Lm −2 h −1 bar −1 ) and good salt rejections (93 % for Na 2 SO 4 ). The filtration of the bovine serum acid (BSA) solution demonstrated the membrane has good antifouling performance with a flux recovery ratio (FRR) of 95.1 %. The proposed method offers a straightforward and rapid approach to fabricating low MWCO NF membranes in an aqueous medium, which has potential in large-scale applications.