Inhibition of Polycyclic Aromatic Hydrocarbons Formation During Supercritical Water Gasification of Sewage Sludge by H2O2 Combined with Catalyst

This work evaluated the alterations in the levels and types of polycyclic aromatic hydrocarbons (PAHs) within both liquid and solid products throughout the process of the catalytic supercritical water gasification of dewatered sewage sludge to examine the catalytic effect of various catalysts and the inhibit reaction pathways. The addition of Ni, NaOH, Na2CO3, H2O2, and KMnO4reduced the concentrations of PAHs, with Ni and H2O2showing the best performance. The concentrations of PAHs, especially higher-molecular-weight compounds in the residues, decreased sharply as the H2O2amount increased. At a 10 wt% H2O2addition, the levels of PAHs in the liquid and solid products were reduced by 91% and 88%, respectively. High-ring PAHs were not detected in the residues as the H2O2amount increased to an 8 wt%. H2O2addition evidently inhibits PAH formation by promoting the ring-opening reactions of initial aromatic compounds in raw sludge and inhibiting the polymerization of open-chain intermediate products. The addition of NaOH + H2O2or Ni + H2O2as combined catalysts significantly lowered PAH concentrations while increasing the H2yield. The addition of 5 wt% Ni + H2O2reduced PAH concentrations in the liquid and solid residues by 70% and 44%, respectively, while the H2yield escalated from 0.13 mol/kg OM to 3.88 mol/kg OM. Possible mechanisms associated with the reaction pathways of these combined catalysts are proposed.