Flexible all-solid-state asymmetric supercapacitor based on Ti3C2Tx MXene/graphene/carbon nanotubes

As the emerging 2D materials, MXenes have been regarded as promising electrode materials in supercapacitor as power supply for wearable and portable electronic devices due to their metallic conductivity, hydrophilic feature, abundant functional groups, and large theoretical specific surface area etc. The capacity and rate capability of MXene-based electrodes is limited by the sheet restacking, hindering their further development. Herein, Ti 3 C 2 T x MXene/graphene/carbon nanotubes (MXene/graphene/CNTs) flexible film was successfully fabricated by vacuum assisted filtration. Intercalation and confinement of graphene and carbon nanotubes between the Ti 3 C 2 T x MXene nanosheets could increase the spacing and specific surface area, alleviate the stacking of MXene nanosheets, thus enhancing the electrochemical properties. The prepared MXene/graphene/CNTs film possesses increased specific surface area, average pore size, pore volume (112.259 m 2 g −1 , 9.982 nm, 0.276 cm 3 g −1 ), compared to MXene (93.088 m 2 g −1 , 3.786 nm, 0.088 cm 3 g −1 ). Consequently, MXene/graphene/CNTs delivers high area specific capacitance of 1862.5 mF cm −2 at 1 mA cm −2 and excellent rate capability (1525 mF cm −2 , 81.88 % at 20 mA cm −2 ). Flexible asymmetric supercapacitor constructed with MXene/graphene/CNTs film and active carbon as positive and negative electrodes, and PVA/H 2 SO 4 gel as solid electrolyte, achieves an energy density of 133.75 μWh cm −2 at the power density of 750 μW cm −2 . In addition, there is still 94.9 % of the initial performance after cycling 8000 charge/discharge cycles at 10 mA cm −2 , corresponding to a single-turn decay rate down to 0.00019 %. Besides, this flexible supercapacitor manifests outstanding electrochemical stability at different bending times. These advantages make the flexible supercapacitor device very promising for wearable electronics applications.