Enhanced catalytic oxidation of bisphenol A via persulfate oxidation by microwave-assisted preparation of ZnCoxFe2-xO4-loaded rice-husk-carbon

Cobalt-doped ZnFe 2 O 4 supported on rice husk carbon (RHC) has been prepared by a microwave-assisted method as a catalyst for the degradation of bisphenol A (BPA) by persulfate (PS) oxidation . Ferrite is a good absorbing material, RHC contains abundant channels, which provide channels for microwaves(MW) reflecting and scattering, and accelerate the synthesis of ZC 1.3 FO. In addition, the polarization and synergistic effect of the contact interface between the two phases is enhanced, which not only improves the dispersity of the magnetic material, but also enhances electron delocalization in the mixed material, promoting electron transfer between Co 3+ /Co 2+ and Fe 3+ /Fe 2+ , and improving the catalytic activity . Our results have shown the degradation rate of BPA by ZnCo 1.3 Fe 0.7 O 4 -50 wt%RHC (ZC 1.3 FO-5C) (0.0697 L/mg min) to be 28 times higher than that by ZC 1.3 FO (0.00251 L/mg min), and the extents of leaching of cobalt and iron were lower than 45 μg/L. Particle video microscopy (PVM) have been used to confirm improved dispersion of composite particles compared to that of a single catalyst during degradation. Free radical quenching experiments, electron paramagnetic resonance (EPR), and X-ray photoelectron spectroscopy (XPS) have confirmed that BPA degradation was caused by the synergistic action of non-free radical and free radical pathways. Intermediates have been identified by electrospray ionization mass spectrometry (ESI-MS), on the basis of which a degradation pathway of BPA by activated PS oxidation in the presence of ZC 1.3 FO-5C is proposed. In brief, a ZC 1.3 FO-5C composite has been prepared by a microwave method to activate PS for the degradation of BPA, realizing the resource utilization of waste ferrous sulfate derived from titanium dioxide production, providing a new concept for the degradation of organic pollutants .