Rapid degradation of atrazine by a novel advanced oxidation process of bisulfite/chlorine dioxide: Efficiency, mechanism, pathway

Recently, (bi)sulfite as the precursor of SO x − generation has drawn significant attention in advance oxidation process based on SO 4 − (SR-AOP) due to its low cost and conforming to waste utilization. The current activation on (bi)sulfite mainly employs the transition metals and their composite materials, which limited its application. In this study, chlorine dioxide (ClO 2 ) was employed to activate bisulfite (BS). It was found that the dominant radicals in BS/ClO 2 process were ClO and SO 4 − according to scavenger experiments and ESR detection. To investigate the performance of the established BS/ClO 2 system, atrazine (ATZ) was used as target pollutant. The degradation efficiency of ATZ reached 86.8% within 3 min and nearly half of the degradation occurred at the first 10 s. The optimum ClO 2 dosage for the ATZ degradation was 100 μM when the BS dosage was 200 μM. The effects of pH, temperature and coexisting substances including halide ions, bicarbonate ion and humic acid on ATZ degradation by BS/ClO 2 were investigated. It is predicted that the degradation pathway of ATZ in this study involved olefination, dealkylation and the combination of dichlorination with hydroxylation according to the final products identified after degradation. The system has also shown the ability on degradation of four pharmaceuticals and personal care products (PPCPs) including ibuprofen, bisphenol A, sulfamethoxazole and carbamazepine. This study reveals that ClO 2 is capable of activating BS and provides a method for effectively degrading refractory organic contaminants .