|
1.
Hao Wen, Zhen Wang, Mixue Tan, Qingxuan Sui, Shurong Xu, Shoujing Mao, Tianyi Xiao, Quan Yuan, Bo Yuan, Ying Wu, Jun Liu.
(2023)
Rapid vat photopolymerization through a superamphiphobic interface.
Virtual and Physical Prototyping,
|
|
2.
Ting Chen, Chengyu Nie, Qirui Cao, Hao Xiong, Xianfu Chen, Yiqun Fan.
(2024)
Fabrication of alumina ceramic membrane supports using LCD 3D printing and titania nanoparticle doping.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY,
44
(3158).
|
|
3.
Chaoyu Liang, Jin Huang, Jianjun Wang, Hongxiao Gong, Dongqiao Bai, Pengbing Zhao.
(2023)
Additive manufacturing of low-temperature co-fired ceramic substrates and surface conductors based on material jetting.
Additive Manufacturing,
78
(103856).
|
|
4.
Yongyi Lu, Zhihao Wang, Min Li, Zongyang Li, Xinyu Hu, Qunjie Xu, Yuehui Wang, Haimei Liu, Yonggang Wang.
(2023)
3D Printed Flexible Zinc Ion Micro-Batteries with High Areal Capacity Toward Practical Application.
ADVANCED FUNCTIONAL MATERIALS,
(2310966).
|
|
5.
Hongjian Huang, Renfeng Xu, Yan Fang, Yunxiang Weng, Zhengchao Wang, Haiqing Liu.
(2023)
Injectable, Water-Reinforceable, and Antibacterial Tissue Adhesive with Underwater Bioadhesion Capability.
CHEMISTRY OF MATERIALS,
35
(21):
(9235–9244).
|
|
6.
Xiang Li, Hanxu Zhang, Hang Zhang.
(2023)
Fabrication of β-TCP/ Akermanite composite scaffold via DLP and in-situ modification of micro-nano surface morphology for bone repair.
CERAMICS INTERNATIONAL,
|
|
7.
Xinrui Zhang, Qingjin Fu, Yicong Wang, Haonan Zhao, Sanwei Hao, Chao Ma, Feng Xu, Jun Yang.
(2023)
Tough Liquid-Free Ionic Conductive Elastomers with Robust Adhesion and Self-Healing Properties for Ionotronic Devices.
ADVANCED FUNCTIONAL MATERIALS,
(2307400).
|
|
8.
Guoxuan Xu, Ketao Hu, Rui Zhou, Ruizhe Xing, Jie Kong.
(2024)
DLP–printable hyperbranched polyborosilazane for microwave absorbing SiBCN(O) ceramic metastructure.
CERAMICS INTERNATIONAL,
50
(781).
|
|
9.
Beining Li, Shuaipeng Wang, Jiachen Chen, Zhenjiang Li, Wenze Shan, Xiaofeng Wang, Benxue Jiang, Jin He, Long Zhang.
(2023)
3D Printing of LuAG:Ce transparent ceramics for laser-driven lighting.
CERAMICS INTERNATIONAL,
49
(38708).
|
|
10.
Wenxi Wang, Yiming Chen, Chongxin Xiao, Siying Xiao, Chuyi Wang, Qingling Nie, Peipei Xu, Jingbo Chen, Ruiyun You, Guifeng Zhang, Yudong Lu.
(2023)
Flexible SERS wearable sensor based on nanocomposite hydrogel for detection of metabolites and pH in sweat.
CHEMICAL ENGINEERING JOURNAL,
474
(145953).
|
|
11.
Ruizhe Xing, Guoxuan Xu, Ning Qu, Rui Zhou, Jiayi Yang, Jie Kong.
(2023)
3D Printing of Liquid-Metal-in-Ceramic Metamaterials for High-Efficient Microwave Absorption.
ADVANCED FUNCTIONAL MATERIALS,
(2307499).
|
|
12.
Yiming Chen, Peng Ni, Renfeng Xu, Xueli Wang, Chunhui Fu, Kaixuan Wan, Yan Fang, Haiqing Liu, Yunxiang Weng.
(2023)
Tough and On-Demand Detachable Wet Tissue Adhesive Hydrogel Made from Catechol Derivatives with a Long Aliphatic Side Chain.
Advanced Healthcare Materials,
(2301913).
|
|
13.
Xin Chen, Ren Zhongguo, Zhang Leran, Yang Liang, Wang Dawei, Hu Yanlei, Li Jiawen, Chu Jiaru, Zhang Li, Wu Dong.
(2023)
Light-triggered multi-joint microactuator fabricated by two-in-one femtosecond laser writing.
Nature Communications,
14
(1):
(1-11).
|
|
14.
Yansong Liu, Yongsheng Liu, Wentan She, Yejie Cao, Qingfeng Zeng, Ning Dong.
(2023)
Effect of reactive diluent concentration on rheological and curing behavior of zirconia ceramic slurry for DLP printing.
International Journal of Applied Ceramic Technology,
21
(1):
(62-75).
|
|
15.
Tianlong Liu, Lixia Yang, Zhaofeng Chen, Mengmeng Yang, Le Lu.
(2023)
Effects of SiC content on the microstructure and mechanical performance of stereolithography-based SiC ceramics.
Journal of Materials Research and Technology-JMR&T,
25
(5184).
|
|
16.
Xiu-Yan Cheng, Shu-Qiang Peng, Li-Xin Wu, Qing-fu Sun.
(2023)
3D-printed stretchable sensor based on double network PHI/PEDOT:PSS hydrogel annealed with cosolvent of H2O and DMSO.
CHEMICAL ENGINEERING JOURNAL,
470
(144058).
|
|
17.
Wencai Dong, Chonggao Bao, Hao Li, Rongzhen Liu, Shijia Li, Haiqiang Ma.
(2023)
Curing performance and print accuracy of oxidized SiC ceramic via vat photopolymerization.
CERAMICS INTERNATIONAL,
49
(29595).
|
|
18.
Siyao Chen, Xue Wan, Jinping Li, Bo Gao, Xuliang Chen, Songhe Meng, Jian Lu.
(2023)
Fabrication of electrical semi-conductive SiCN ceramics by vat photopolymerization.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY,
165
(123).
|
|
19.
Yansong Liu, Yongsheng Liu, Wentan She, Wenbo Li, Yejie Cao, Jing Wang.
(2023)
Influence of sintering temperature on the thermal conductivity of digital light processing 3D-printed yttria-stabilized zirconia ceramic.
CERAMICS INTERNATIONAL,
49
(27514).
|
|
20.
Wang Chunliu, Zhang Jinyong, Lei Liwen.
(2023)
Effect of Particle Size on Silicon Nitride Ceramic Slurry by Stereolithography.
JOURNAL OF WUHAN UNIVERSITY OF TECHNOLOGY-MATERIALS SCIENCE EDITION,
38
(3):
(514-519).
|
|
21.
Shaoyun Chen, Lanqin Yu, Shiyu Zhang, Xiaolu Sun, Bo Qu, Rui Wang, Yanyu Zheng, Xiaoying Liu, Wenjie Li, Jianhong Gao, Dongxian Zhuo.
(2023)
Synergistic strengthening and toughening of 3D printing photosensitive resin by bismaleimide and acrylic liquid-crystal resin.
Journal of Science-Advanced Materials and Devices,
8
(100565).
|
|
22.
Linlin Wang, Fenghua Zhang, Shanyi Du, Jinsong Leng.
(2023)
4D Printing of Triple-Shape Memory Cyanate Composites Based on Interpenetrating Polymer Network Structures.
ACS Applied Materials & Interfaces,
15
(17):
(21496–21506).
|
|
23.
Ce Li, Fenghua Zhang, Wei Zhao, Linlin Wang, Yanju Liu, Jinsong Leng.
(2023)
Preparation and Properties of Shape Memory PEG/IEM Resin and Its Composite Designed for Ureter Stent.
Advanced Healthcare Materials,
12
(16):
(2300400).
|
|
24.
Haiyu Xian, Lin Li, Yilei Ding, Mingjing Chu, Changqing Ye.
(2023)
Preparation and Orthogonal Analysis for Dual-Responsive Electrochromic Polymer Dispersed Liquid Crystal Devices.
Polymers,
15
(8):
(1860).
|
|
25.
Ning Wang, Hai Chang, Chi Zhang, Yingna Wu, Rui Yang, Xing Zhang, Zirong Zhai.
(2023)
Preparation of High-Stability Ceramic Slurry with Gel Behavior for Stereolithography 3D Printing.
Materials,
16
(7):
(2816).
|
|
26.
Shuqiang Peng, Naveen Thirunavukkarasu, Jie Chen, Xinxin Zheng, Chuanzhou Long, Xianmei Huang, Zixiang Weng, Longhui Zheng, Haopeng Wang, Xiangfang Peng, Lixin Wu.
(2023)
Vat photopolymerization 3D printing of transparent, mechanically robust, and self-healing polyurethane elastomers for tailored wearable sensors.
CHEMICAL ENGINEERING JOURNAL,
463
(142312).
|
|
27.
Chaochao Sun, Jiaqi Chen, Shuhao Yan, Damei Jiang, Xiangcheng Chu, Songmei Yuan.
(2023)
Piezoelectric-pneumatic micro-jet printing of high viscous piezoelectric slurry.
Additive Manufacturing,
66
(103469).
|
|
28.
Gang Wang, Zhengxiang Zhou, Mengyu Chen, Juanjuan Wang, Yingfeng Yu.
(2023)
UV-Curable Polyurethane Acrylate Pressure-Sensitive Adhesives with High Optical Clarity for Full Lamination of TFT-LCD.
ACS Applied Polymer Materials,
5
(3):
(2051–2061).
|
|
29.
C.C. Wang, B.L. Zhu, C.H. Yi, H.X. Chen, H. Peng, J.H. Yin, J. Wu, H.Z. Gu.
(2023)
Effects of diluents and Ag nanowires on the electrical-optical properties of polymer dispersed liquid crystal films based on aromatic polyurethane acrylate.
LIQUID CRYSTALS,
|
|
30.
Li Wang, Ning Wang, Longxuan Yan, Yao Ma, Zhaofa Zhang, Sen Shi, Lanjie Niu, Xiangyang Li, Bingheng Lu.
(2023)
High performance X-band electromagnetic wave absorption of SiBCN metamaterials fabricated by direct pyrolysis.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY,
43
(4073).
|
|
31.
Tingfeng Xu, Huijie Li, Yi Xia, Sheng Ding, Qingliang Yang, Gensheng Yang.
(2023)
Three-Dimensional-Printed Oral Films Based on LCD: Influence Factors of the Film Printability and Received Qualities.
Pharmaceutics,
15
(3):
(758).
|
|
32.
Yong Zeng, Di Sha, Liyuan Zhang, Yizhen Chen, Renhui Qiu, Wendi Liu.
(2023)
Photo-Curing 3D Printing of Highly Deformable Palm Oil-Based Thermosets with Soft Fatty Acid Chain Entanglement.
ACS Sustainable Chemistry & Engineering,
11
(9):
(3780–3788).
|
|
33.
Xiaohua Cui, Jiaming Liu, Ending Zhang, Ziyang Gong, Liyan Liang, Jun Shi, Xiaopeng Hao, Jiwen Hu, Mangeng Lu.
(2023)
Synthesis and Properties of a Novel Thermally Conductive Pressure-Sensitive Adhesive with UV-Responsive Peelability.
MACROMOLECULAR RAPID COMMUNICATIONS,
44
(7):
(2200884).
|
|
34.
Yuewei Li, Ranjith Kumar Kankala, Lixin Wu, Ai-Zheng Chen, Shi-Bin Wang.
(2023)
3D-Printed Photocurable Resin with Synergistic Hydrogen Bonding Based on Deep Eutectic Solvent.
ACS Applied Polymer Materials,
5
(1):
(991–1001).
|
|
35.
Lie Wu, Yihong Kang, Yuhao Deng, Fan Yang, Rui He, Xue-Feng Yu.
(2023)
Long-Term Antifogging Coating Based on Black Phosphorus Hybrid Super-Hydrophilic Polymer Hetero-Network.
Nanomaterials,
13
(1):
(86).
|
|
36.
Li Zhu, Yidi Xu, Siwen Liu, Huanhuan Chen, Jiyi Tao, Xian Tong, Yuncang Li, Shengbin Huang, Jixing Lin, Cuie Wen, Jianfeng Ma.
(2023)
Microstructure, mechanical properties, friction and wear performance, and cytotoxicity of additively manufactured zirconia-toughened alumina for dental applications.
COMPOSITES PART B-ENGINEERING,
250
(110459).
|
|
37.
Xiong Zheng, Yanqiong Bao, An Huang, Guangzhao Qin, Maogang He.
(2023)
3D printing double-layer hydrogel evaporator with surface structures for efficient solar steam generation.
SEPARATION AND PURIFICATION TECHNOLOGY,
306
(122741).
|
|
38.
Shuo Wang, Lian Peng, Chengnan Song, Chengyu Wang.
(2023)
Digital light processing additive manufacturing of thin dental porcelain veneers.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY,
43
(1161).
|
|
39.
Zhe Xiang, Xi Zhao, Guoxiang Wang, Chenze Qi, Sujing Zhou, Jinjing Li, Yong Gao.
(2023)
Diblock copolymer worms stabilized pH-responsive Pickering emulsions: An efficient and recyclable platform for Claisen-Schmidt condensation reaction.
JOURNAL OF INDUSTRIAL AND ENGINEERING CHEMISTRY,
117
(538).
|
|
40.
Minhao Shen, Renli Fu, Houbao Liu, Yunan Liu, Yunjia Hu, Yikun Zhang, Xuhai Liu, Ming Li, Zhe Zhao.
(2023)
Photosensitive Si3N4 slurry with combined benefits of low viscosity and large cured depth for digital light processing 3D printing.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY,
43
(881).
|
|
41.
Niping Zhou, Lu Zhang, Wenqing Wang, Xueqin Zhang, Keqiang Zhang, Mingji Chen, Yixing Huang, Rujie He, Daining Fang.
(2022)
Stereolithographically 3D Printed SiC Metastructure for Ultrabroadband and High Temperature Microwave Absorption.
Advanced Materials Technologies,
8
(4):
(2201222).
|
|
42.
Ting Chen, Peng Xu, Xianfu Chen, Tao Wang, Kaiyun Fu, Minghui Qiu, Yiqun Fan.
(2023)
High-flux ceramic membrane derived from UV-curable slurry for efficient separation of nanoparticles suspension.
SEPARATION AND PURIFICATION TECHNOLOGY,
304
(122331).
|
|
43.
Boshi Feng, Meng Zhang, Chen Qin, Dong Zhai, Yufeng Wang, Yanling Zhou, Jiang Chang, Yufang Zhu, Chengtie Wu.
(2023)
3D printing of conch-like scaffolds for guiding cell migration and directional bone growth.
Bioactive Materials,
22
(127).
|
|
44.
Weizhe Tang, Tong Zhao, Rui Dou, Li Wang.
(2022)
Fabrication of high-strength Si/SiC composites with low shrinkage rates via vat photopolymerization technology and liquid silicon infiltration.
Additive Manufacturing,
59
(103168).
|
|
45.
Yuewei Li, Shuqiang Peng, Ranjith Kumar Kankala, Lixin Wu, Ai-Zheng Chen, Shi-Bin Wang.
(2022)
3D printing of mechanically robust MXene-encapsulated polyurethane elastomer.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING,
163
(107182).
|
|
46.
Yixuan Wu, Ling Cai, Guangxue Chen, Fengzhi Yang, Minghui He.
(2022)
3D printed, environment tolerant all-solid-state capacitive ionic skin.
Journal of Materials Chemistry A,
10
(35):
(18218-18225).
|
|
47.
Shuyuan Zhang, Li Wang, Yu Luo, Keke Wang, Xueming Feng, Yuechen Pei, Haobo Wu, Yingtao Li, Zhengduo Wang, Bingheng Lu.
(2023)
A convenient, low-cost graphene UV-cured additive manufacturing electronic process to achieve flexible sensors.
CHEMICAL ENGINEERING JOURNAL,
451
(138521).
|
|
48.
Junxiang Ma, Kunyi Cai, Chao Yang, Meiqi Li, Xiaopeng Pan, Yi Huang, Juming Yao, Jinhuan Zheng, Jianzhong Shao.
(2022)
Synthesis and properties of photocurable polyurethane acrylate for textile artificial leather.
PROGRESS IN ORGANIC COATINGS,
171
(107017).
|
|
49.
Kejie Wang, Rongzhen Liu, Chonggao Bao.
(2022)
SiC paste with high curing thickness for stereolithography.
CERAMICS INTERNATIONAL,
48
(28692).
|
|
50.
Ziyu Hua, Guangxue Chen, Kai Zhao, Ren’ai Li, Minghui He.
(2022)
A Repeatable Self-Adhesive Liquid-Free Double-Network Ionic Conductor with Tunable Multifunctionality.
ACS Applied Materials & Interfaces,
14
(19):
(22418–22425).
|
|
51.
Zhou Rui, Wang Yansong, Liu Ziyu, Pang Yongqiang, Chen Jianxin, Kong Jie.
(2022)
Digital Light Processing 3D-Printed Ceramic Metamaterials for Electromagnetic Wave Absorption.
Nano-Micro Letters,
14
(1):
(1-14).
|
|
52.
Jiali Meng, Qin Lian, Shuang Xi, Yingjie Yi, Yi Lu, Guofeng Wu.
(2022)
Crown fit and dimensional accuracy of zirconia fixed crowns based on the digital light processing technology.
CERAMICS INTERNATIONAL,
48
(17852).
|
|
53.
Shuqiang Peng, Qiuquan Guo, Naveen Thirunavukkarasu, Yanling Zheng, Zian Wang, Longhui Zheng, Lixin Wu, Zixiang Weng.
(2022)
Tailoring of photocurable ionogel toward high resilience and low hysteresis 3D printed versatile porous flexible sensor.
CHEMICAL ENGINEERING JOURNAL,
439
(135593).
|
|
54.
Shaoyun Chen, Yalu Duan, Wenqiang Hua, Qilang Lin, Bo Qu, Rui Wang, Yanyu Zheng, Xiaoying Liu, Wenjie Li, Dongxian Zhuo.
(2022)
Synthesis of novel acrylic liquid-crystal resin and its in-situ enhancement in light-curing 3D printing performance.
Journal of Materials Research and Technology-JMR&T,
17
(2158).
|
|
55.
Zhengyuan Zhang, Hongyu Yan, Zejun Yin, Yuechuan Wang.
(2022)
Photopolymerized and acetylene-functionlized polyacrylates for photoclickable elastomers.
POLYMER,
238
(124415).
|
|
56.
Shaoyun Chen, Yongqiang Luo, Yihao Xu, Yanyu Zheng, Xiaoying Liu, Rui Wang, Bo Qu, Dongxian Zhuo.
(2021)
Synthesis and Characterization of Cardanol-Based Methacrylate Oligomers for Three-Dimensional Printing Resins.
ACS Sustainable Chemistry & Engineering,
9
(48):
(16316–16327).
|
|
57.
Lei Xu, Qingliang Yang, Wei Qiang, Huijie Li, Weizhen Zhong, Siying Pan, Gensheng Yang.
(2021)
Hydrophilic Excipient-Independent Drug Release from SLA-Printed Pellets.
Pharmaceutics,
13
(10):
(1717).
|
|
58.
Dexing Zhu, Jian Zhang, Qiao Xu, Yaguo Li.
(2021)
3D Printing of Customized Aspheric Lenses for Imaging.
Polymers,
13
(20):
(3477).
|
|
59.
Yuchao Wu, Yong Zeng, Yizhen Chen, Chao Li, Renhui Qiu, Wendi Liu.
(2021)
Photocurable 3D Printing of High Toughness and Self-Healing Hydrogels for Customized Wearable Flexible Sensors.
ADVANCED FUNCTIONAL MATERIALS,
31
(52):
(2107202).
|
|
60.
Xiaoteng Chen, Jinxing Sun, Binbin Guo, Yue Wang, Shixiang Yu, Wei Wang, Jiaming Bai.
(2022)
Effect of the particle size on the performance of BaTiO3 piezoelectric ceramics produced by additive manufacturing.
CERAMICS INTERNATIONAL,
48
(1285).
|
|
61.
Xiaojie Lv, Jingjing Wang, Danning Ding, Jiaojiao Liang, Zhongzheng Zhao, Yuan Liang, Zhenfei Zhang, Chunlin Ye, Yuwei Chen, Peng Wei, Yanping Wang, Yong He, Yumin Xia.
(2021)
3D Printing Conductive Composites with Poly(ionic liquid) as a Noncovalent Intermedia to Fabricate Carbon Circuits.
MACROMOLECULAR MATERIALS AND ENGINEERING,
306
(12):
(2100560).
|
|
62.
Wei Li, Congcong Cui, Jianxun Bao, Ge Zhang, Shan Li, Gong Wang.
(2021)
Properties regulation of SiC ceramics prepared via stereolithography combined with reactive melt infiltration techniques.
CERAMICS INTERNATIONAL,
47
(33997).
|
|
63.
Xiao Lin, Hui Fu, Zhenhai Hou, Youliang Si, Weiguang Shan, Yan Yang.
(2021)
Three-dimensional printing of gastro-floating tablets using polyethylene glycol diacrylate-based photocurable printing material.
INTERNATIONAL JOURNAL OF PHARMACEUTICS,
603
(120674).
|
|
64.
Linlin Wang, Fenghua Zhang, Yanju Liu, Shanyi Du, Jinsong Leng.
(2021)
Photosensitive Composite Inks for Digital Light Processing Four-Dimensional Printing of Shape Memory Capture Devices.
ACS Applied Materials & Interfaces,
13
(15):
(18110–18119).
|
|
65.
Huang Dijun, Ren Yongxia, Yang Ruoning, He Zhiguo, Yao Youwei.
(2021)
Preparation and characterization of a novel ultraviolet/thermal dual-curing thiol-ene/polyurethane acrylate coating.
Journal of Coatings Technology and Research,
18
(4):
(1109-1116).
|
|
66.
Ling Cai, Guangxue Chen, Junfei Tian, Bin Su, Minghui He.
(2021)
Three-dimensional Printed Ultrahighly Sensitive Bioinspired Ionic Skin Based on Submicrometer-Scale Structures by Polymerization Shrinkage.
CHEMISTRY OF MATERIALS,
33
(6):
(2072–2079).
|
|
67.
Yunpeng Wang, Xianfei Cao, Jie Cheng, Bowen Yao, Yusen Zhao, Suli Wu, Benzhi Ju, Shufen Zhang, Ximin He, Wenbin Niu.
(2021)
Cephalopod-Inspired Chromotropic Ionic Skin with Rapid Visual Sensing Capabilities to Multiple Stimuli.
ACS Nano,
15
(2):
(3509–3521).
|
|
68.
Maolin Liu, Yuanfang Luo, Demin Jia.
(2020)
Facile synthesis of composite films featuring bulk superhydrophobicity, durability, and repairability for aquatic show.
COMPOSITES SCIENCE AND TECHNOLOGY,
197
(108231).
|
|
69.
Guojiao Ding, Rujie He, Keqiang Zhang, Niping Zhou, Hao Xu.
(2020)
Stereolithography 3D printing of SiC ceramic with potential for lightweight optical mirror.
CERAMICS INTERNATIONAL,
46
(18785).
|
|
70.
Xue-Ran Deng, Xiang-Yang Lei, Wei Yang, Hao-Hao Hui, Tian-Yu Wang, Jin-Ju Chen, Ji-Liang Zhu, Qing-Hua Zhang.
(2020)
Template-Free Fabrication of Refractive Index Tunable Polysiloxane Coating Using Homogeneous Embedding Strategy: Application in High-Power Laser System.
Nanomaterials,
10
(2):
(381).
|
|
71.
Sihang Liu, Jun Ma, Liangbo Xu, Weifeng Lin, Weili Xue, Mei Huang, Shengfu Chen.
(2020)
An electrospun polyurethane scaffold-reinforced zwitterionic hydrogel as a biocompatible device.
Journal of Materials Chemistry B,
8
(12):
(2443-2453).
|
|
72.
Shuqiang Peng, Yuewei Li, Lixin Wu, Jie Zhong, Zixiang Weng, Longhui Zheng, Zhi Yang, Jia-Tao Miao.
(2020)
3D Printing Mechanically Robust and Transparent Polyurethane Elastomers for Stretchable Electronic Sensors.
ACS Applied Materials & Interfaces,
12
(5):
(6479–6488).
|
|
73.
Yichen Li, Xiaohui Wang, Mingan Hu, Lan Zhou, Liqin Chai, Qinguo Fan, Jianzhong Shao.
(2019)
Patterned SiO2/Polyurethane Acrylate Inverse Opal Photonic Crystals with High Color Saturation and Tough Mechanical Strength.
LANGMUIR,
35
(44):
(14282–14290).
|
|
74.
Nan Zheng, Xuan Zhang, Xin Min, Jie Liu, Wenge Li, Xiaohui Ji.
(2019)
Design of robust superhydrophobic coatings using a novel fluorinated polysiloxane with UV/moisture dual cure system.
REACTIVE & FUNCTIONAL POLYMERS,
143
(104329).
|
|
75.
Yuewei Li, Jie Zhong, Lixin Wu, Zixiang Weng, Longhui Zheng, Shuqiang Peng, Xu Zhang.
(2019)
High performance POSS filled nanocomposites prepared via UV-curing based on 3D stereolithography printing.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING,
117
(276).
|
|
76.
Xiaoran Deng, Yunlu Dai, Jianhua Liu, Ying Zhou, Ping'an Ma, Ziyong Cheng, Yinyin Chen, Kerong Deng, Xuejiao Li, Zhiyao Hou, Chunxia Li, Jun Lin.
(2015)
Multifunctional hollow CaF2:Yb3+/Er3+/Mn2+-poly(2-Aminoethyl methacrylate) microspheres for Pt(IV) pro-drug delivery and tri-modal imaging.
BIOMATERIALS,
50
(154).
|
|
77.
Yunlu Dai, Cuimiao Zhang, Ziyong Cheng, Ping’an Ma, Chunxia Li, Xiaojiao Kang, Dongmei Yang, Jun Lin.
(2012)
pH-responsive drug delivery system based on luminescent CaF2:Ce3+/Tb3+-poly(acrylic acid) hybrid microspheres.
BIOMATERIALS,
33
(2583).
|
|
78.
Weifeng Lin, Juan Zhang, Zhen Wang, Shengfu Chen.
(2011)
Development of robust biocompatible silicone with high resistance to protein adsorption and bacterial adhesion.
Acta Biomaterialia,
7
(2053).
|
|
79.
Yongyi Lu, Zongyang Li, Xin Wang, Zhihao Wang, Min Li, Xinyu Hu, Yuehui Wang, Haimei Liu, Yonggang Wang.
(2024)
3D printed dual network Cross-Linked hydrogel electrolytes for high area capacity flexible zinc ion Micro-Batteries.
CHEMICAL ENGINEERING JOURNAL,
490
(151523).
|
|
80.
Ruyue Su, Jingyi Chen, Xueqin Zhang, Wenqing Wang, Rujie He, Hao Xu, Ying Li.
(2024)
3D printed SiOC architecture towards terahertz electromagnetic interference shielding and absorption.
CHEMICAL ENGINEERING JOURNAL,
498
(155689).
|
|
81.
Wei Wei, Junkai Wang, Xinliang Zhang, Xin Luo, Bolin Chen, Xiangyu Shen, Lili Yuan, Yunfei Huang, Yu Long.
(2024)
3D printing for capacitive flexible pressure sensors of small pressure high sensitivity with microdome-labyrinth structure.
Smart Materials and Structures,
34
(1):
(015012).
|
|
82.
Qingxin Jin, Chengyun Wang, Han Wu, Xin Luo, Jiaqi Li, Guangmeng Ma, Yu Li, Chunyi Luo, Fawei Guo, Yu Long.
(2024)
3D Printing of Capacitive Pressure Sensors with Tuned Wide Detection Range and High Sensitivity Inspired by Bio-Inspired Kapok Structures.
MACROMOLECULAR RAPID COMMUNICATIONS,
(2300668).
|
|
83.
Dexing Zhu, Jian Zhang, Qiao Xu, Yaguo Li.
(2024)
3D printing of glass aspheric lens by digital light processing.
Journal of Manufacturing Processes,
116
(40).
|
|
84.
Yue Zhang, Ao Lan, Yuanhao Xia, Xiangyu Yin, Bingwei He, Pengli Zhu.
(2025)
3D-Printing of PAM hydrogel-based iontronic for dual-mode epidermal sensors.
IEEE SENSORS JOURNAL,
25
(8):
(1-1).
|
|
85.
Yuejia Li, Fenghua Zhang, Yanju Liu, Jinsong Leng.
(2024)
4D printed shape memory bismaleimide resin with high storage modulus and low shrinkage rate via second-stage curing.
CHEMICAL ENGINEERING JOURNAL,
491
(152196).
|
|
86.
Bin Sun, Peilun Wang, Chongkun Shao, Pengfei Jiang, Yongsheng Guo, Shu Yan, Wenjun Fang.
(2025)
Amphiphilic comb-block copolymers synthesized by photoinitiated polymerization for stabilization of oil–water emulsion by solution self-assembly.
FUEL,
385
(134164).
|
|
87.
Chi Zhang, Ning Wang, Hai Chang, Yingna Wu, Rui Yang, Dongxu Yao, Zirong Zhai.
(2024)
Annealing-induced improvement in thermal conductivity of Si3N4 specimens produced by vat photopolymerization: A comparative study of vat photopolymerization and cold isostatic pressing.
CERAMICS INTERNATIONAL,
|
|
88.
Wang Xin, Xia Neng, Pan Chengfeng, Zhao Jinsheng, Hao Bo, Su Lin, Jin Dongdong, Xu Qingsong, Liu Xurui, Hou Xingyu, Zhang Li.
(2025)
Beyond surface tension-dominated water surface jumping.
Nature Communications,
16
(1):
(1-10).
|
|
89.
Daokun Wen, Peize Yang, Yunxiang Ma, Mengyao Wu, Xiaoshuang Li, Minghui Zhu, Bing Geng, Guanghui Cui, Hui Li.
(2025)
Biobased UV-Curable Solvent-Free Fluorosilicone Adhesives: Tunable Adhesion, Degradability, and Performance in Diverse Liquid Environments.
ACS Applied Polymer Materials,
7
(1):
(538-546).
|
|
90.
Zhumin Yu, Kai Zhao, Yanbo Zhao, Mengyue Wu, Rong Qian, Xinzhou Wu, Wenming Su, Yuan-Qiu-Qiang Yi, Changqing Ye, Yanlin Song.
(2024)
Bioinspired multi-dimensional anti-counterfeiting device by combining electrochromism and structural color.
CHEMICAL ENGINEERING JOURNAL,
481
(148500).
|
|
91.
Mei-Ling Yang, Guo-Xiang Zhou, Ning Xie, Kun-Peng Lin, Yan-Zhao Zhang, Zhe Zhao, Yun-Peng He, Yu-Hang Zhang, Zhi-Hua Yang, De-Chang Jia, Yu Zhou.
(2025)
Conformal and rapid micro-molding manufacturing of ultraviolet-curable silver paste on curved surfaces using digital light processing.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY,
213
(153).
|
|
92.
Ting Chen, Peng Xu, Minghui Qiu, Xianfu Chen, Zhaoxiang Zhong, Yiqun Fan.
(2024)
Construction of anti-fouling ceramic tubular membranes with corrugated inner surfaces using DLP 3D printing.
JOURNAL OF MEMBRANE SCIENCE,
706
(122941).
|
|
93.
Xinrong Huang, Gang Wang, Yi Zhang, Zhengxiang Zhou, Yingfeng Yu.
(2025)
Controlled microphase separation in polyurethane acrylate-based optically clear pressure sensitive adhesives.
PROGRESS IN ORGANIC COATINGS,
200
(109064).
|
|
94.
Yue Han, Kai Zhao, Ying Jia, Ren’ai Li, Guangxue Chen, Minghui He.
(2024)
Deep Eutectic-Based All-Solid-State Conductive Elastomers: Achieving Antibacterial, Conductive, and Transparent Properties.
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH,
63
(23):
(10234-10242).
|
|
95.
Minhao Shen, Renli Fu, Yi Zhang, Kuang Sun, Wei Xu, Yanlin Jiang, Zhe Zhao, Ming Liu.
(2024)
Defect-free Si3N4 ceramics by vat photopolymerization 3D printing with nitrogen-hydrogen debinding atmosphere.
CERAMICS INTERNATIONAL,
50
(42709).
|
|
96.
Ming-Yue Jiang, Xiang-Yu Meng, Jin Zhou, Zhen-Yu Wei, Hai-Feng Zhang, Ping Shen.
(2024)
Design and manufacture of near-net-shape metal-ceramic composites with gradient-layered structure and optimized damage tolerance.
Additive Manufacturing,
84
(104112).
|
|
97.
Qiuyi Li, Yongzhe Liu, Delu Zhao, Yupu Yang, Qibo Liu, Yujun Zhang, Junling Wu, Zheqin Dong.
(2024)
Digital light printing of zirconia/resin composite material with biomimetic graded design for dental application.
DENTAL MATERIALS,
|
|
98.
Qianlong Fu, Yuting Ma, Juan Wang, Yongzhao Yang, Peng Wang, Shuang Li, Yang Zhao.
(2024)
Digital light processing of high-purity SiC ceramic membrane support modified by SiC whisker.
CERAMICS INTERNATIONAL,
50
(41237).
|
|
99.
Keliang Liu, Haibo Ding, Zhejun Chong, Yi Zeng, Yanfang Niu, Junning Zhang, Youlong Kang, Xin Du, Zhongze Gu.
(2024)
Direct laser writing photonic crystal hydrogel sensors for in-situ sensing in microfluidic device.
CHEMICAL ENGINEERING JOURNAL,
482
(148679).
|
|
100.
Li Wan, Xueqi Chen, Peng Hu, Lijie Wang, Guowen Xiong, Yuxin Gou, Fanrong Ai.
(2024)
DLP-printed standard tooth -colored ceramic dentures and its biocompatibility study.
CERAMICS INTERNATIONAL,
|
|
101.
Yu Sun, Xiaoxia Le, Hui Shang, Ying Shen, Yue Wu, Qingquan Liu, Partick Théato, Tao Chen.
(2024)
Dual-Mode Hydrogels with Structural and Fluorescent Colors toward Multistage Secure Information Encryption.
ADVANCED MATERIALS,
36
(28):
(2401589).
|
|
102.
Song Guo, Shao-hua Luo, Xiaolong Li, Zihan Wang, Xian Zhang, Xuefei Lei, Sheng-xue Yan.
(2024)
Effect of silica nanospheres silanized by functional silanes on the physicochemical and mechanical properties of Bis-GMA/TEGDMA dental composite resin by photocuring synthesis.
INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES,
132
(103724).
|
|
103.
Jingxuan Zhang, Yeming Huang, Renhong Wang, Sirun zhang, Dunju Wang.
(2025)
Efficient 3D Printing of RDX composites with high relative density via photocuring Energetic Polymers.
POLYMER,
(128301).
|
|
104.
Yingming Zhao, Xingwu Chen, Siyang Tu, Xin Zhang, Shengdong Zhang, Hangchuan Zhang, Xiang Zhang, Lixuan Chen.
(2024)
Electro-optical performance of solid-state electrochromic device based on self-supporting electrolyte.
OPTICAL MATERIALS,
149
(114991).
|
|
105.
Yaxin Duan, Hongbin Yang, Yue Niu, Ying Han, Aoran Wang, Hongxiang Xie, Ting Xu, Mengge Gao, Chuanling Si.
(2024)
Engineering cellulose nanofibril aerogel for reinforcing polymethyl methacrylate with superior mechanical strength, high transparency, and improved thermal stability.
COMPOSITES SCIENCE AND TECHNOLOGY,
258
(110894).
|
|
106.
Chang Yang, Hengyu Feng, Xudong Liu, Yuxin Guo, Mengya Sun, Wenhua Wang, Qingyan Kang, Ziyang Su, Wei Zhu, HeYuan Wang, Linghan Xiao.
(2024)
Enhancing frost-resistant and electrically conductive properties of bacterial cellulose-based IPN hydrogel wound dressings via photopolymerization: Towards epidermal sensor applications.
CHEMICAL ENGINEERING JOURNAL,
498
(155295).
|
|
107.
Tong Che, Xiang-Yu Meng, Tao Yu, Rui-Fen Guo, Ping Shen.
(2025)
Fabrication and characterization of SiC-reinforced magnesium-matrix composites with honeycomb structures and anisotropic properties.
CERAMICS INTERNATIONAL,
51
(949).
|
|
108.
Jianan Shan, Gaoming Mo, Qing Sun, Jing Huang, Qin Ouyang, Qing Huang.
(2024)
Fabrication of SiC(OAl) and SiC(Al) fibers by melt-spinning, UV curing, thermolysis and sintering of photo-sensitive polyvinylaluminocarbosilane.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY,
44
(3501).
|
|
109.
Wei Xiao, Shaoqi Shi, Pei Liu, Zhilei Hao, Zhaoxia Tian, Qingqing Gao, Kai Xu, Yinxu Ni, Jin Chen, Changtian Zhu, Zhixiang Li, Gaojie Xu, Hui Zhang, Fenghua Liu.
(2025)
Facile construction of intelligent flexible double layer honeycomb sandwich structure for tunable microwave absorption by 4D printing.
Additive Manufacturing,
99
(104661).
|
|
110.
Yiming Chen, Huiying Li, Renfeng Xu, Yan Fang, Qinhui Chen, Zhengchao Wang, Haiqing Liu, Yunxiang Weng.
(2024)
Ferried Albumin-Inspired Bioadhesive with Dynamic Interfacial Bonds for Emergency Rescue.
Advanced Healthcare Materials,
(2400033).
|
|
111.
Xiaohu Li, Xuhang Zhang, Zhisen Zhu, Wenling Zhang, Yingdan Liu.
(2025)
Highly stretchable, adhesive and 3D-printable eutectic ion conductor for wearable electronics and self-powered sensors.
Journal of Materials Chemistry C,
|
|
112.
Yidong Wu, Dan Hong, Shijie Qiu, Yi Fang, Yabin Zhu.
(2024)
Intrinsic antibacterial photopolymerization 3D-printed thermosets from citronellol and cinnamyl alcohol: Synthesis and properties.
POLYMER TESTING,
140
(108582).
|
|
113.
Wang Guo, Ping Li, Yanting Wei, Lei Zhao, Yuanheng Pang, Yanjian Huang, Xiaotong Ye, Shan Wang, Bin Liu, Hui You, Yu Long.
(2024)
Ionic substitution through bredigite doping for microstructure and performance adjustment in DLP 3D-printed TPMS porous HA bone scaffolds.
Virtual and Physical Prototyping,
|
|
114.
Shuoshuo Zang, Jianli Chen, Yan Yu, Xuegao Qin, Hewen Liu.
(2025)
Ligand-Assisted Reprecipitation of Highly Luminescent Perovskite Nanocrystals.
ACS Applied Nano Materials,
|
|
115.
Dongmei Wang, Rui Wang, Shaoyun Chen, Jianhong Gao, Cuifang Cai, Yanyu Zheng, Xiaoying Liu, Bo Qu, Nairong Chen, Dongxian Zhuo.
(2024)
Low viscosity and highly flexible stereolithographic 3D printing resins for flexible sensors.
MATERIALS & DESIGN,
243
(113052).
|
|
116.
Zhongya Zhang, Lijuan Zhang, Guangwu Wen, Yongzhao Hou, Nannan Zhu, Cheng Zhong, Jing Xue, Chuncheng Wei, Shuang Li.
(2025)
Mechanical properties of β-Si3N4/SiCN ceramics formed by digital light processing.
CERAMICS INTERNATIONAL,
|
|
117.
Sheng Cao, Shuming Zhang, Manchao Liu, Mirjavid Heydaroglu, Chengping Wen, Juan Sun, Yongjiang Wang, Min Yu, Xiaoyu Han.
(2024)
Mechanically Robust and Highly Stretchable Acrylated Glycerol Polyether Elastomers for Vat Photopolymerization 3D Printing.
ACS Applied Polymer Materials,
6
(21):
(13268-13280).
|
|
118.
Yang Ziwei, Wang Jingxiao, Wan Xiao, Xu Hongcheng, Zhang Chuanyu, Lu Xiaoke, Jing Weixuan, Guo Chuanfei, Wei Xueyong.
(2024)
Microbubble-based fabrication of resilient porous ionogels for high-sensitivity pressure sensors.
Microsystems & Nanoengineering,
10
(1):
(1-10).
|
|
119.
Zhou Sha, Tianyi Ling, Wenqi Yang, Haosu Xie, Chunnan Wang, Shuqing Sun.
(2024)
Microfluidic synthesis and accurate immobilization of low-density QD-encoded magnetic microbeads for multiplex immunoassay.
Journal of Materials Chemistry B,
|
|
120.
Huiying Li, Shuichang Chen, Hongjian Huang, Yan Fang, Yunxiang Weng, Qinhui Chen, Xinqing Liu, Haiqing Liu.
(2024)
Modified cotton gauze with high hemostatic efficacy due to controllable hygroscopicity and wet tissue adhesiveness.
JOURNAL OF APPLIED POLYMER SCIENCE,
(e55861).
|
|
121.
Yiming Chen, Yunxiang Weng, Yishi Cheng, Yan Fang, Qinhui Chen, Xianmou Fan, Haiqing Liu.
(2024)
Multifunctional, low swelling and tough wet tissue adhesive sensor based on in situ reduced graphene oxide and polyphenols.
CHEMICAL ENGINEERING JOURNAL,
499
(156596).
|
|
122.
Ying Tan, Jierong Li, Yali Nie, Zhi Zheng.
(2024)
Novel Approach for Cardioprotection: In Situ Targeting of Metformin via Conductive Hydrogel System.
Polymers,
16
(15):
(2226).
|
|
123.
B.L. Zhu, X.J. Cai, C.C. Wang, J. Wu, J.L. Yao, W.Q. Sun.
(2024)
Optimization of transparent conductive properties of magnetron sputtered Sb-doped SnO2 films by RF power: Towards application in polymer-dispersed liquid crystal (PDLC) films.
OPTICAL MATERIALS,
150
(115262).
|
|
124.
Ruyue Su, Jingyi Chen, Xueqin Zhang, Wenqing Wang, Rujie He, Ying Li.
(2024)
Photocured Ti3C2Tx MXene/SiOC ceramic composite for electromagnetic interference shielding in the terahertz band.
Journal of Materials Chemistry A,
|
|
125.
P. Wang, S.S. Zhu, S.P. Zhang, F. Su, J.K. Yuan, Y.J. Jia, Y.Q. Fu, T. Li, Y.L. Zhang, P. Ramasamy, J. Eckert, C.S. Lao, Z.W. Chen.
(2025)
Photopolymerization and reaction sintering of ZrC/SiC ultra-high-temperature ceramics fabricated by 3D printing.
CERAMICS INTERNATIONAL,
|
|
126.
Hang Ning, Shaoyun Chen, Yan'e Liu, Bo Qu, Yanyu Zheng, Xiaoying Liu, Wenjie Li, Rui Wang, Nairong Chen, Dongxian Zhuo.
(2025)
Polybutadiene polyurethane acrylate photosensitive resin and its application in 3D printing.
Journal of Science-Advanced Materials and Devices,
10
(100844).
|
|
127.
Yang Liu, Ruixue Sun, Jianmin Han.
(2025)
Preparation of CaSiO3 porous scaffold via DLP 3D printing and its surface modification through in situ growth of HAp.
International Journal of Applied Ceramic Technology,
(e15074).
|
|
128.
Yaru Qin, Chenyu Zhao, Yujie Huang, Jiguang Dong, Xingyu Yang, Chenglong Shi.
(2024)
Preparation of porous β-Si3N4/Si5AlON7 composite ceramics for digital light processing and study of mechanical and dielectric properties.
CERAMICS INTERNATIONAL,
50
(41299).
|
|
129.
Lin Jia, Wang Shuai, Jin Hua, Wang Rongwen, Cui Shuyuan, Yang Yihang, Wang Jinhuo, Huang Guimei.
(2024)
Preparation of Si-O-C-Based Precursor Ceramics for Photo-Curing 3D Printing: Selection of Silicone Prepolymer System and Photoinitiator.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE,
(1-10).
|
|
130.
Xiangyu Tian, Zixu Zeng, Yi He, Lecheng Lei, Chunlin Yu, Xingwang Zhang.
(2025)
Rb Doping and Lattice Strain Synergistically Engineering Oxygen Vacancies in TiO2 for Stable High-Contrast Photoreversible Color Switching.
ADVANCED FUNCTIONAL MATERIALS,
(2423514).
|
|
131.
Yansong Liu, Wenbo Li, Yongsheng Liu, Yu Pan, Yejie Cao, Xiang Zheng, Jian Chen, Yijiang Zeng.
(2024)
Regulation of sintering procedure on property of DLP-printing SiO2–Al2O3 ceramic: Key of cristobalite precipitation.
International Journal of Applied Ceramic Technology,
(e15005).
|
|
132.
Chaoyu Liang, Jin Huang, Hongxiao Gong, Dongqiao Bai, Yunna Pu, Jianjun Wang, Pengbing Zhao.
(2024)
Research on material jetting fabrication and dielectric constant calculation of LTCC based on silica-borosilicate glass.
Materials Today Communications,
40
(109741).
|
|
133.
Ruyue Su, Pingan Liu, Jingyi Chen, Wenqing Wang, Xiaotong Chen, Rujie He, Ying Li.
(2025)
Self-Assembly and 3D Printing of SiCw@MXene/SiOC Metastructure Toward Simultaneously Excellent Terahertz Electromagnetic Interference (EMI) Shielding and Electron-to-Thermal Conversion Properties.
ADVANCED FUNCTIONAL MATERIALS,
(2500970).
|
|
134.
Senyuan Hao, Qizhi Ma, Menghui Cao, Yunchao Jia, Yilong Li.
(2025)
Self-Healing Ionogels Based on Ternary Polymer With Tunable Adhesion and Stretchability for Strain Sensing Applications.
JOURNAL OF POLYMER SCIENCE,
|
|
135.
Qianlong Fu, Yongzhao Yang, Juan Wang, Feng Hu, Shuang Li, Yang Zhao.
(2024)
Silicon carbide ceramics manufactured by digital light processing and low temperature sintering.
CERAMICS INTERNATIONAL,
50
(36892).
|
|
136.
Qianlong Fu, Shiquan Sui, Yuting Ma, Shuo Sun, Xiaoyu Wang, Qingbo Meng, Shuang Li, Yang Zhao.
(2024)
Silicon carbide whiskers reinforced silicon carbide ceramics prepared by vat photopolymerization and liquid silicon infiltration.
CERAMICS INTERNATIONAL,
|
|
137.
Jiazhou Zeng, Xin Jing, Liya Lin, Gangrong Wang, Yaoxun Zhang, Peiyong Feng.
(2025)
Smart sensing hydrogel actuators conferred by MXene gradient arrangement.
JOURNAL OF COLLOID AND INTERFACE SCIENCE,
677
(816).
|
|
138.
Yongzhi Liang, Siyu Wu, Liqiong Lin, Pan Jia, Zheng Zhong.
(2024)
Solvent-assisted strategy for the design of multifunctional and ultrafast healable eutectogels.
POLYMER,
308
(127392).
|
|
139.
Hu Youwang, Wang Guilin, Zhang Qinglong, Sun Xiaoyan, Chen Haikuan.
(2024)
The crucial role of hydroxyethyl methacrylate in the sintering of fused silica glass using ultraviolet-cured silica nanoparticle slurries: dispersing nanoparticles.
JOURNAL OF SOL-GEL SCIENCE AND TECHNOLOGY,
(1-15).
|
|
140.
Yan Yang, Qu Lin, Zhenhai Hou, Gensheng Yang, Lian Shen.
(2025)
Three-Dimensional-Printed Osteochondral Scaffold with Biomimetic Surface Curvature for Osteochondral Regeneration.
Pharmaceutics,
17
(2):
(153).
|
|
141.
Guo Du, Jie Guo, Junnai Wang, Da Bian, Xia Zhang.
(2024)
Tribological behavior of 3D printed nanofluid reinforced photosensitive self-lubricating polymer materials.
Additive Manufacturing,
80
(103959).
|
|
142.
Zhang Zeyu, Peng Dejun, Shang Xueyan, Zhao Xin, Ren Shixue, Pang Jiuyin, Li Shujun.
(2024)
Ultra-tough light-curing ionogels for UV shielding.
Communications Materials,
5
(1):
(1-12).
|
|
143.
Manman Li, Yuchen Gao, Qionglin Wang, Weitao Yang, Guo-Lin Gao, Zaixing Jiang.
(2025)
UV-Assisted Material Extrusion Additive Manufacturing of Double-Base Propellant.
Polymers,
17
(6):
(808).
|
|
144.
Jiaxin Wu, Zhi Li, Xingliang Meng, Bo Cheng, Jing Yang, Binbin Li, Xinyu Wang.
(2025)
ZrO2-CPS/ZrO2 graded composite ceramics with high osteoinductivity for dental implants fabricated by stereolithography.
CERAMICS INTERNATIONAL,
|
|
145.
Yafang Han, Jun Shi, Jiwen Hu, Renjie Zhou, Ziyang Gong, Weile Li.
(2024)
π–π Interactions for Dramatically Enhanced Cohesion and Underwater Adhesion in Pressure-Sensitive Adhesives.
ACS Applied Polymer Materials,
6
(24):
(15293-15303).
|
145 Citations
F2516556